RS485 - Ethernet Converter
RS485 TO ETH moduleProvides an easy way to communicate between RS485 and RJ45 port Ethernet, can be configured via web page.
Features:
M0 series 32-bit ARM processor, fast speed, high efficiency
10 / 100M Auto MDI / MDIX ethernet interface regardless of cross-over or straight-through cable
Configurable RS485 baud rate (600bps ~ 230.4Kbps), supports five parity check options: None, Odd, Even, Sign, Space
Available operating modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)
Configurable via web page, AT commands, serial protocol and network protocol, provides configuration protocol that can be integrated into your own software
Supports customized heartbeat packets, make sure the connection is correct and actively receive sensor data
Supports customized registration packages that automatically pass the registered package as an identifier upon connection so different devices can be distinguished
Supports customized web page, allows user to customize module configuration page
Supports RFC2217-like protocol, can communicate with devices whose serial settings (baud rate, data bit, etc.) can change
KeepAlive mechanism detects broken connections, auto reconnects
Supports timeout restart (no data restart), ensures a long-term stable connection, configurable restart time
Supports DNS domain name resolution, configurable DNS server
DHCP supports automatically obtained IP or static IP
Firmware can be upgraded over the network
Restore factory settings with software and / or hardware
Comes with customizable default MAC address
Provided software: module configuration software, TCP / UDP test tool, VCOM virtual serial port software
Sample code: host (socket), VB, C ++, Delphi, Android, iOS etc.
RS485 - Ethernet Converter Technical Specifications
Manufacturer | WaveShare |
Product Category | Sensors and Modules |
Connector | 4 pin RJ45 |
Communication speed | 10 / 100Mbps |
Interface protection | 1.5KV electromagnetic isolation |
Protocols | IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client |
TX cache | 6Kbyte |
RX cache | 4Kbyte |
RS485 Connector | screw terminal (A +, B-, GND) |
Data bit | 5bit, 6bit, 7bit, 8bit |
Stop bit | 12 |
Parity bit | None, Odd, Even, Sign, Space |
Baud rate | 600bps ~ 230.4Kbps |
RX cache | 800byte |
Hardware flow control | no |
RS485 up / down pull registers | 2.2KΩ |
Power source | 5.0 ~ 7.0V (5V recommended) |
Working current | 150mA (@ 5V) |
Power consumption | <1W |
Interface protection | reverse proof, ESD protection, anti-surge |
Operating temperature | -25 ~ 75 ° C |
Storage temperature | -40 ~ 105 ° C |
Documents
- RS485 to Ethernet Converter Datasheet for EUCheck the file.
Useful Links
- Other ModulesYou can review our products.
- Sensors and ModulesYou can review our products.
RS485 - Ethernet Converter
- Features
- Payment Options
- Comments (0)
- Images
-
RS485 - Ethernet Converter
RS485 TO ETH moduleProvides an easy way to communicate between RS485 and RJ45 port Ethernet, can be configured via web page.
Features:
M0 series 32-bit ARM processor, fast speed, high efficiency
10 / 100M Auto MDI / MDIX ethernet interface regardless of cross-over or straight-through cable
Configurable RS485 baud rate (600bps ~ 230.4Kbps), supports five parity check options: None, Odd, Even, Sign, Space
Available operating modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)
Configurable via web page, AT commands, serial protocol and network protocol, provides configuration protocol that can be integrated into your own software
Supports customized heartbeat packets, make sure the connection is correct and actively receive sensor data
Supports customized registration packages that automatically pass the registered package as an identifier upon connection so different devices can be distinguished
Supports customized web page, allows user to customize module configuration page
Supports RFC2217-like protocol, can communicate with devices whose serial settings (baud rate, data bit, etc.) can change
KeepAlive mechanism detects broken connections, auto reconnects
Supports timeout restart (no data restart), ensures a long-term stable connection, configurable restart time
Supports DNS domain name resolution, configurable DNS server
DHCP supports automatically obtained IP or static IP
Firmware can be upgraded over the network
Restore factory settings with software and / or hardware
Comes with customizable default MAC address
Provided software: module configuration software, TCP / UDP test tool, VCOM virtual serial port software
Sample code: host (socket), VB, C ++, Delphi, Android, iOS etc.
RS485 - Ethernet Converter Technical Specifications
Manufacturer WaveShare Product Category Sensors and Modules Connector 4 pin RJ45 Communication speed 10 / 100Mbps Interface protection 1.5KV electromagnetic isolation Protocols IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client TX cache 6Kbyte RX cache 4Kbyte RS485 Connector screw terminal (A +, B-, GND) Data bit 5bit, 6bit, 7bit, 8bit Stop bit 12 Parity bit None, Odd, Even, Sign, Space Baud rate 600bps ~ 230.4Kbps RX cache 800byte Hardware flow control no RS485 up / down pull registers 2.2KΩ Power source 5.0 ~ 7.0V (5V recommended) Working current 150mA (@ 5V) Power consumption <1W Interface protection reverse proof, ESD protection, anti-surge Operating temperature -25 ~ 75 ° C Storage temperature -40 ~ 105 ° C Documents
- RS485 to Ethernet Converter Datasheet for EUCheck the file.
Useful Links
- Other ModulesYou can review our products.
- Sensors and ModulesYou can review our products.