CAN-BUS Shield V2
Can-Bus,It is a serial communication protocol generally used in the automotive industry. You can get a lot of information about the vehicle from the vehicle brains and give commands if the vehicle supports it.
Can-Bus Shield V2 acts as a bridge to communicate your vehicles with Arduino. With this shield card, the engine speed, cooling water temperature, fault codes etc. can be detected from vehicles using Can-Bus communication protocol. you can read a lot of information. You can review the forum page about the product and the documents for the sample application.
CAN-BUS Shield V2 Technical Specifications
- CAN V2.0 can transfer data at speeds up to 1 Mb / s
- Industrial standard 9 pin sub-D connector
- OBD-II and CAN standard selectable pinout
- Replaceable chip select pin
- Replaceable CS pin for TF card slot
- Replaceable INT pin
- Screw terminal to connect CAN_H and CAN_L easily
- Arduino Uno pin headers
- 2 Grove connectors (I2C and UART)
- SPI Interface up to 10 MHz
- Standard (11-bit) and extended (29-bit) data and remote frame support
- Dual receiver buffer with priority message recording
Documents
- CAN-BUS Shield V2Check the file.
Useful Links
- Arduino Shield TypesYou can examine.
CAN-BUS Shield V2
- Features
- Payment Options
- Comments (0)
- Images
-
CAN-BUS Shield V2
Can-Bus,It is a serial communication protocol generally used in the automotive industry. You can get a lot of information about the vehicle from the vehicle brains and give commands if the vehicle supports it.
Can-Bus Shield V2 acts as a bridge to communicate your vehicles with Arduino. With this shield card, the engine speed, cooling water temperature, fault codes etc. can be detected from vehicles using Can-Bus communication protocol. you can read a lot of information. You can review the forum page about the product and the documents for the sample application.
CAN-BUS Shield V2 Technical Specifications
- CAN V2.0 can transfer data at speeds up to 1 Mb / s
- Industrial standard 9 pin sub-D connector
- OBD-II and CAN standard selectable pinout
- Replaceable chip select pin
- Replaceable CS pin for TF card slot
- Replaceable INT pin
- Screw terminal to connect CAN_H and CAN_L easily
- Arduino Uno pin headers
- 2 Grove connectors (I2C and UART)
- SPI Interface up to 10 MHz
- Standard (11-bit) and extended (29-bit) data and remote frame support
- Dual receiver buffer with priority message recording
Documents
- CAN-BUS Shield V2Check the file.
Useful Links
- Arduino Shield TypesYou can examine.