Emlid NAVIO2 Flight Control Board - Autopilot
NAVIO2Flight Control card of all kindsradio controlledin unmanned systemsairplanein yours,droneOpen source code that you can use in yourdevelopment board. It can be used in industrial areas as well as hobby and entertainment. NAVIO2 working with Raspberry Pi Control board works with Linux operating system.
Note:
It works with the Linux operating system.
Emlid NAVIO2 Flight Control Board Technical Specifications
Manufacturer | Emlid |
Product Category | Drone Parts |
GNSS Receiver | Tracks GPS, GLONASS, Beidou, Galileo and Sbas satellite signals. External antenna with MCX connector can be attached. |
Dual IMU | It has accelerometer, gyroscope and magnetometer. |
RC I / O coprocessor | It is PPM / Sbus powered and the motor provides 14 pwm output for the servos. |
High resolution barometer | Provides 10 cm resolution height information. |
Replication ports | ADC, I2C and UART interfaces. |
High security power stage | It has high voltage protection and power module for voltage, current measurement. |
Size | 55x65mm |
Weight | 23g |
Operating temperature | -40… + 85 ºC |
Supply voltage | 4.75-5.25 V |
Average power consumption | <150 mA |
Available Ports:
Power module
UART
I2C
ADC
12 pin pwm servo output
PPM / S.Bus
ICs:
MPU9250 9DOF IMU
LSM9DS1 9DOF IMU
MS5611 Barometer
U-blox M8N GLONASS / GPS / Beidou
Cortex-M3 RC I / O co-processor
RGB Led
Documents
- Navio2 DatasheetCheck the file.
Useful Links
- Drone PartsYou can review our products.
- Drone and MulticoptersYou can review our products.
Navio2 Flight Control Board
- Features
- Payment Options
- Comments (1)
- Images
-
Emlid NAVIO2 Flight Control Board - Autopilot
NAVIO2Flight Control card of all kindsradio controlledin unmanned systemsairplanein yours,droneOpen source code that you can use in yourdevelopment board. It can be used in industrial areas as well as hobby and entertainment. NAVIO2 working with Raspberry Pi Control board works with Linux operating system.
Note:
It works with the Linux operating system.
Emlid NAVIO2 Flight Control Board Technical Specifications
Manufacturer Emlid Product Category Drone Parts GNSS Receiver Tracks GPS, GLONASS, Beidou, Galileo and Sbas satellite signals. External antenna with MCX connector can be attached. Dual IMU It has accelerometer, gyroscope and magnetometer. RC I / O coprocessor It is PPM / Sbus powered and the motor provides 14 pwm output for the servos. High resolution barometer Provides 10 cm resolution height information. Replication ports ADC, I2C and UART interfaces. High security power stage It has high voltage protection and power module for voltage, current measurement. Size 55x65mm Weight 23g Operating temperature -40… + 85 ºC Supply voltage 4.75-5.25 V Average power consumption <150 mA Available Ports:
Power module
UART
I2C
ADC
12 pin pwm servo output
PPM / S.Bus
ICs:
MPU9250 9DOF IMU
LSM9DS1 9DOF IMU
MS5611 Barometer
U-blox M8N GLONASS / GPS / Beidou
Cortex-M3 RC I / O co-processor
RGB Led
Documents
- Navio2 DatasheetCheck the file.
Useful Links
- Drone PartsYou can review our products.
- Drone and MulticoptersYou can review our products.