Arduino Analog Turbidity Sensor
Arduino turbidity sensorIt determines the water quality by measuring the turbidity level. It can detect suspended particles in water by measuring the total amount of suspended solids (TSS) in water, varying light transmittance and scattering rate. The higher the TTS, the higher the liquid turbidity level.
This arduino turbidity sensor has both analog and digital signal output modes. Since the threshold is adjustable in digital signal mode, you can select the mode according to the MCU.
Turbidity sensors can be used in water quality measurement in rivers and streams, wastewater and wastewater measurements, sediment transport research and laboratory measurements.
Arduino Analog Turbidity Sensor Technical Specifications
Manufacturer | DFRobot |
Product Category | Water Sensors |
Operating voltage | 5V DC |
Working Current | 40mA (MAX) |
Reaction time | <500 ms |
Insulation Resistance | 100M (Min) |
Output Method | Analogue |
Analog Output | 0 - 4.5V |
Digital Output | High / Low level signal (you can adjust the threshold value by adjusting the potentiometer) |
Operating temperature | 5 ℃ ~ 90 ℃ |
Storage Temperature | -10 ℃ ~ 90 ℃ |
Weight | 30g |
Adapter Sizes | 38mm x 28mm x 10mm / 1.5 inch x 1.1 inch x 0.4 inch |
Package Included:
Turbidity sensor adapter x1
Turbidity sensor probe x1
Turbidity sensor cable x1
Gravity analog sensor cable x1
Documents
- Turbidity sensor SKU: SEN0189 WikiCheck out the page.
- Turbidity sensorWatch the video.
Useful Links
- Water SensorsYou can review our products.
- Arduino Sensors and ModulesYou can review our products.
Gravity: Arduino Analog Turbidity Sensor
- Features
- Payment Options
- Comments (0)
- Images
-
Arduino Analog Turbidity Sensor
Arduino turbidity sensorIt determines the water quality by measuring the turbidity level. It can detect suspended particles in water by measuring the total amount of suspended solids (TSS) in water, varying light transmittance and scattering rate. The higher the TTS, the higher the liquid turbidity level.
This arduino turbidity sensor has both analog and digital signal output modes. Since the threshold is adjustable in digital signal mode, you can select the mode according to the MCU.
Turbidity sensors can be used in water quality measurement in rivers and streams, wastewater and wastewater measurements, sediment transport research and laboratory measurements.
Arduino Analog Turbidity Sensor Technical Specifications
Manufacturer DFRobot Product Category Water Sensors Operating voltage 5V DC Working Current 40mA (MAX) Reaction time <500 ms Insulation Resistance 100M (Min) Output Method Analogue Analog Output 0 - 4.5V Digital Output High / Low level signal (you can adjust the threshold value by adjusting the potentiometer) Operating temperature 5 ℃ ~ 90 ℃ Storage Temperature -10 ℃ ~ 90 ℃ Weight 30g Adapter Sizes 38mm x 28mm x 10mm / 1.5 inch x 1.1 inch x 0.4 inch Package Included:
Turbidity sensor adapter x1
Turbidity sensor probe x1
Turbidity sensor cable x1
Gravity analog sensor cable x1
Documents
- Turbidity sensor SKU: SEN0189 WikiCheck out the page.
- Turbidity sensorWatch the video.
Useful Links
- Water SensorsYou can review our products.
- Arduino Sensors and ModulesYou can review our products.