Module for 2 Channel Optocoupler Isolation
PC817 Module,It is used when insulation control and voltage conversion is needed. It can realize 3.3V or 5V to control 3.6-30V voltage interface. After the control terminal is turned on, the controlled terminal will also be turned on. It has photoelectric isolation, strong anti-interference feature. It can power high-power triodes, MOS tubes and other applications that require high-voltage driving, and can also directly drive low-power 24V relays.If it's a pulsed signal, please note that the 817 limit is 4KHZ or lower. Please don't use this module if the control signal is more than 4KHZ, it will not work properly.
Whether the output is a high potential output or a low potential can be realized with a jumper wire.
2 channels 817 are independent, different voltages, etc. It can provide simultaneous control.
PC817 2 Channel Optocoupler Isolation Module Technical Specifications
Manufacturer | TZT |
Product Category | Arduino Modules |
Sherry | PC817 |
Driver Terminal Signal Voltage | 3.6V - 24V |
Output Terminal Voltage Range | 3.6V - 30V (output current depends on the specific situation, but not exceed 10MA maximum, total power is constant, voltage and current are inversely proportional) |
Dimensions | 29mm x 38mm |
Useful Links
- Arduino ModulesYou can review our products.
- Arduino Sensors and ModulesYou can review our products.
PC817 2 Channel Optocoupler Module For Isolation
- Features
- Payment Options
- Comments (0)
- Images
-
Module for 2 Channel Optocoupler Isolation
PC817 Module,It is used when insulation control and voltage conversion is needed. It can realize 3.3V or 5V to control 3.6-30V voltage interface. After the control terminal is turned on, the controlled terminal will also be turned on. It has photoelectric isolation, strong anti-interference feature. It can power high-power triodes, MOS tubes and other applications that require high-voltage driving, and can also directly drive low-power 24V relays.If it's a pulsed signal, please note that the 817 limit is 4KHZ or lower. Please don't use this module if the control signal is more than 4KHZ, it will not work properly.
Whether the output is a high potential output or a low potential can be realized with a jumper wire.
2 channels 817 are independent, different voltages, etc. It can provide simultaneous control.
PC817 2 Channel Optocoupler Isolation Module Technical Specifications
Manufacturer TZT Product Category Arduino Modules Sherry PC817 Driver Terminal Signal Voltage 3.6V - 24V Output Terminal Voltage Range 3.6V - 30V (output current depends on the specific situation, but not exceed 10MA maximum, total power is constant, voltage and current are inversely proportional) Dimensions 29mm x 38mm Useful Links
- Arduino ModulesYou can review our products.
- Arduino Sensors and ModulesYou can review our products.