Small Push Pull Solenoid - 12VDC
Solenoids are basically electromagnets; They are made from a large coil of copper wire with an armature (metal) in the middle. When the coil is energized, the snail is pulled into the center of the coil. This allows the solenoid to be pulled from one end.
Many low cost solenoids operate in push-only or pull-only mode and do not have springs for push-back. However thisSmall Push and Pull SolenoidIt has a 30mm body and is very useful. 12VDC works when activated and restores when power is cut and springs are stretched.
12VDC Small Push Pull Solenoid Features
- 12 VDC operation (please note lower voltage will result in lean / slow running) - 250mA current draw
- Push or pull type with 5.5mm shot
- DC coil resistance: 40 ohms
- 5 Newton starting force (12VDC)
- 1.4 oz / 39 grams
Documents
- Solenoid DriverCheck the file.
Small Push Pull Solenoid - 12VDC
- Features
- Payment Options
- Comments (0)
- Images
-
Small Push Pull Solenoid - 12VDC
Solenoids are basically electromagnets; They are made from a large coil of copper wire with an armature (metal) in the middle. When the coil is energized, the snail is pulled into the center of the coil. This allows the solenoid to be pulled from one end.
Many low cost solenoids operate in push-only or pull-only mode and do not have springs for push-back. However thisSmall Push and Pull SolenoidIt has a 30mm body and is very useful. 12VDC works when activated and restores when power is cut and springs are stretched.
12VDC Small Push Pull Solenoid Features
- 12 VDC operation (please note lower voltage will result in lean / slow running) - 250mA current draw
- Push or pull type with 5.5mm shot
- DC coil resistance: 40 ohms
- 5 Newton starting force (12VDC)
- 1.4 oz / 39 grams
Documents
- Solenoid DriverCheck the file.
Tags