Arduino Tilt Sensor Module (SW420)
ItTilt Sensor ModuleThe inclination is detected by the 2 balls inside the sensor. After the inclination reaches a certain angle, these 2 small balls inside are separated from the connectors under the sensor and function as open switches. When the sensor is in an upright position, the balls touch the connectors on the leg of the sensor and turn off the switch. Sensitivity adjustment can be made with the potentiometer on it. Thanks to LM393, information from the sensor passes through the comparator and the status of the sensor can be observed thanks to the LEDs on it.
Arduino Tilt Sensor Module Specifications (SW420)
- SW420 tilt sensor
- Working voltage: 3.3V-5V
- Output format: Digital output (0 and 1)
- PCB board size: 3.2 cm x 1.4 cm
- It works with LM393 voltage comparator.
Useful Links
- Arduino Sensors and ModulesCheck out our products.
Arduino Tilt Sensor Module - SW420
- Features
- Payment Options
- Comments (0)
- Images
-
Arduino Tilt Sensor Module (SW420)
ItTilt Sensor ModuleThe inclination is detected by the 2 balls inside the sensor. After the inclination reaches a certain angle, these 2 small balls inside are separated from the connectors under the sensor and function as open switches. When the sensor is in an upright position, the balls touch the connectors on the leg of the sensor and turn off the switch. Sensitivity adjustment can be made with the potentiometer on it. Thanks to LM393, information from the sensor passes through the comparator and the status of the sensor can be observed thanks to the LEDs on it.
Arduino Tilt Sensor Module Specifications (SW420)
- SW420 tilt sensor
- Working voltage: 3.3V-5V
- Output format: Digital output (0 and 1)
- PCB board size: 3.2 cm x 1.4 cm
- It works with LM393 voltage comparator.
Useful Links
- Arduino Sensors and ModulesCheck out our products.