Bluetooth WIFI ESP-32 Development Module LORA32 Lora 868 Mhz ESP32 LoRa OLED with 0.96 Inch Blue Screen Antenna
ESP32 Wi-FiSX1276 chip based on 868 - 915 MHz frequency, high sensitivity -148 dBm, + 20 dBm output power, high reliability, long transmission distance.
Onboard 32 MB flash Wi-Fi antenna, 0.96 inch blue OLED screen, lithium battery charging circuit, CP2102 interface and USB serial chip, perfect support for Arduino development environment, can be used for program control, product development is very easy and fast.
Bluetooth WIFI ESP-32 Development Module Technical Specifications
Operating voltage: 3.3 - 7 V
Operating temperature range: -40 to 90 ° C (-40 to 194 ° F)
Support for Sniffer software protocol analysis, Station, SoftAP and Wi-Fi Direct modes
Data rates: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmission power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to -98 dBm
UDP continuous throughput: 135 Mbps
Reminders:
1) 868/915 MHz antenna needs to be connected with IPEX interface (if antenna is not connected, it may damage LoRa chip)
2) When the battery is full, the blue LED will not work.
3) When using, make sure the battery is positive and negative, otherwise it will be damaged.
4) With IO port touch touch signal input, you need to add the 100nF pull-down capacitor on this pin
Package Included:
1 x lora32 OLED
1 x Line
2 x Pin
1 x Spring antenna
Documents
- Bluetooth WIFI ESP-32 Development Module Pin DiagramCheck the file.
- Bluetooth WIFI ESP-32 Development Module DemoWatch the video.
Bluetooth WIFI ESP-32 Development Module LORA32 Lora 868 Mhz ESP32 LoRa OLED
- Features
- Payment Options
- Comments (0)
- Images
-
Bluetooth WIFI ESP-32 Development Module LORA32 Lora 868 Mhz ESP32 LoRa OLED with 0.96 Inch Blue Screen Antenna
ESP32 Wi-FiSX1276 chip based on 868 - 915 MHz frequency, high sensitivity -148 dBm, + 20 dBm output power, high reliability, long transmission distance.
Onboard 32 MB flash Wi-Fi antenna, 0.96 inch blue OLED screen, lithium battery charging circuit, CP2102 interface and USB serial chip, perfect support for Arduino development environment, can be used for program control, product development is very easy and fast.Bluetooth WIFI ESP-32 Development Module Technical Specifications
Operating voltage: 3.3 - 7 V
Operating temperature range: -40 to 90 ° C (-40 to 194 ° F)
Support for Sniffer software protocol analysis, Station, SoftAP and Wi-Fi Direct modes
Data rates: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmission power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to -98 dBm
UDP continuous throughput: 135 MbpsReminders:
1) 868/915 MHz antenna needs to be connected with IPEX interface (if antenna is not connected, it may damage LoRa chip)
2) When the battery is full, the blue LED will not work.
3) When using, make sure the battery is positive and negative, otherwise it will be damaged.
4) With IO port touch touch signal input, you need to add the 100nF pull-down capacitor on this pinPackage Included:
1 x lora32 OLED
1 x Line
2 x Pin
1 x Spring antennaDocuments
- Bluetooth WIFI ESP-32 Development Module Pin DiagramCheck the file.
- Bluetooth WIFI ESP-32 Development Module DemoWatch the video.