



Arduino and Raspberry Pi Compatible Analog Dissolved Oxygen Sensor / Meter Kit
Analog Dissolved Oxygen Sensor / Meter KitIt is compatible with both Arduino and Raspberry Pi.
This product is a dissolved oxygen sensor kit compatible with Arduino microcontrollers. This product is used to measure dissolved oxygen in water, reflect water quality. Aquaculture, environmental monitoring, natural sciences, etc. It is widely applied in many water quality applications. You can also check the Liquid Sensor Selection Guide to get to know our liquid sensor range better.
The probe is a galvanic probe, does not need polarization time and remains usable at any time. Filling solution and membrane cover are interchangeable, resulting in low maintenance costs. The signal converter board is plug and play and has good compatibility. It can be easily integrated into any control or detection system. This product is easy to use with high compatibility. With open source code and detailed tutorial, this product is well suited for your projects in detecting dissolved oxygen concentration for aquatic organisms.
ATTENTION:Due to International Import and Export Policy, delivery to corrosive solution (acid and alkaline solution) by air transport is not allowed. The filling solution is not included in the kit. You need to buy in the local store or distribute the solution yourself, see WiKi FAQ-S4. It cannot work without filling the solution! Please pay attention to purchasing!
There are 7 items of materials in the product content:
- Galvanic Dissolved Oxygen Probe with Membrane Cap x1
- Spare Membrane Cover x1
- Signal Converter Board x1
- Gravity Analog Sensor Cable x1
- Waterproof Gasket x2
- Screw Cap for BNC Connector x1
- Plastic Dropper x2
Arduino and Raspberry Pi Compatible Analog Dissolved Oxygen Sensor / Meter Kit Technical Specifications
Manufacturer | DFRobot |
Product Category | You ask |
Cable Length | 2meters |
Probe Connector | BNC |
Detection Range | 0 ~ 20mg / L |
Prop Type | Galvanic Prop |
Pressure Range | 0 ~ 50PSI |
Operating voltage | 3.3 ~ 5.5V |
Documents
- Product Information PageYou can examine.
Useful Links
- Gas and Pressure SensorsYou can review our products.
- Arduino Sensors and ModulesYou can review our products.
Gravity: Arduino and Raspberry Pi Compatible Analog Dissolved Oxygen Sensor / Meter Kit
- Features
- Payment Options
- Comments (0)
- Images
-
Arduino and Raspberry Pi Compatible Analog Dissolved Oxygen Sensor / Meter Kit
Analog Dissolved Oxygen Sensor / Meter KitIt is compatible with both Arduino and Raspberry Pi.
This product is a dissolved oxygen sensor kit compatible with Arduino microcontrollers. This product is used to measure dissolved oxygen in water, reflect water quality. Aquaculture, environmental monitoring, natural sciences, etc. It is widely applied in many water quality applications. You can also check the Liquid Sensor Selection Guide to get to know our liquid sensor range better.
The probe is a galvanic probe, does not need polarization time and remains usable at any time. Filling solution and membrane cover are interchangeable, resulting in low maintenance costs. The signal converter board is plug and play and has good compatibility. It can be easily integrated into any control or detection system. This product is easy to use with high compatibility. With open source code and detailed tutorial, this product is well suited for your projects in detecting dissolved oxygen concentration for aquatic organisms.
ATTENTION:Due to International Import and Export Policy, delivery to corrosive solution (acid and alkaline solution) by air transport is not allowed. The filling solution is not included in the kit. You need to buy in the local store or distribute the solution yourself, see WiKi FAQ-S4. It cannot work without filling the solution! Please pay attention to purchasing!
There are 7 items of materials in the product content:
- Galvanic Dissolved Oxygen Probe with Membrane Cap x1
- Spare Membrane Cover x1
- Signal Converter Board x1
- Gravity Analog Sensor Cable x1
- Waterproof Gasket x2
- Screw Cap for BNC Connector x1
- Plastic Dropper x2
Arduino and Raspberry Pi Compatible Analog Dissolved Oxygen Sensor / Meter Kit Technical Specifications
Manufacturer DFRobot Product Category You ask Cable Length 2meters Probe Connector BNC Detection Range 0 ~ 20mg / L Prop Type Galvanic Prop Pressure Range 0 ~ 50PSI Operating voltage 3.3 ~ 5.5V Documents
- Product Information PageYou can examine.
Useful Links
- Gas and Pressure SensorsYou can review our products.
- Arduino Sensors and ModulesYou can review our products.