SX1262 LoRa HAT for Raspberry Pi, 915 MHz Frequency Band
SX1262 based Raspberry Pi LoRa HATIt covers the 915MHz frequency band. Provides data transfer up to 5 km over serial port.
Using the new generation LoRa spread spectrum modulation technology, the communication distance of the module is up to 5km, it also supports automatic repeat to transmit longer. Other features include Wake on Radio, wireless configuration, carrier sensor, communication switch, etc.
Compared with normal LoRa modules, SX1262 LoRa HAT provides longer communication distance, higher rate, lower consumption, better security and anti-interference. Industrial control, smart home, data collection, etc. Suitable for a variety of applications.
Technicial Specifications
- Standard Raspberry Pi 40PIN GPIO extension header supports Raspberry Pi series boards
- Built-in CP2102 USB TO UART converter for serial debugging
- Brings UART control interface to connect host boards such as Arduino / STM32
- 4x LED indicators, easy to check module status
- LoRa spread spectrum modulation technology, up to 84 available signal channels, longer communication distance, more resistant to interference
- Suitable for ultra long range communication, automatic multi-level repeat allows multiple networks in the same area
- Low power consumption features such as deep sleep and Wake on Radio for battery powered applications
- Customizable communication key that cannot be decrypted greatly increases the security of user data
- Supports LBT monitoring signal channel sound before transmission, greatly improving the success rate in harsh environments
- Supports RSSI signal intensity to evaluate the signal quality and adjust the network
- Supports wireless parameter configuration by sending wireless command / data packet, remotely configure or receive module parameter
- Supports fixed point transmission, broadcast, signal channel monitor
- Comes with development resources and manual (samples for Raspberry Pi / STM32)
Please Read the Note.
- Raspberry Pi is not included in the product.
What's on the Card?
SX1262 LoRa module
74HC125V: voltage level converter
CP2102: USB to UART converter
Raspberry Pi GPIO connector: for connecting with Raspberry Pi
USB UART port
UART header: for connecting host boards such as STM32 / Arduino
SMA antenna connector
lIPEX antenna connector
Indicators:
- RXD / TXD: UART RX / TX indicator
- AUX: auxiliary display
- PWR: power display
UART selection jumpers
- A: Control the LoRa module via USB TO UART
- B: Control the LoRa module with Raspberry Pi
- A: Access to Raspberry Pi via UART USB
LoRa mode selection jumpers
- short M0, short M1: transmission mode
- short M0, open M1: configuration mode
- Turn on M0, short M1: WOR mode
- Turn on M0, turn on M1: deep sleep mode
Useful Links
- Product informationYou can examine.
- LoRaWAN ModuleYou can review our products.
- Wireless CommunicationYou can review our products.
SX1262 LoRa HAT for Raspberry Pi, 915 MHz
- Features
- Payment Options
- Comments (0)
- Images
-
SX1262 LoRa HAT for Raspberry Pi, 915 MHz Frequency Band
SX1262 based Raspberry Pi LoRa HATIt covers the 915MHz frequency band. Provides data transfer up to 5 km over serial port.
Using the new generation LoRa spread spectrum modulation technology, the communication distance of the module is up to 5km, it also supports automatic repeat to transmit longer. Other features include Wake on Radio, wireless configuration, carrier sensor, communication switch, etc.
Compared with normal LoRa modules, SX1262 LoRa HAT provides longer communication distance, higher rate, lower consumption, better security and anti-interference. Industrial control, smart home, data collection, etc. Suitable for a variety of applications.
Technicial Specifications
- Standard Raspberry Pi 40PIN GPIO extension header supports Raspberry Pi series boards
- Built-in CP2102 USB TO UART converter for serial debugging
- Brings UART control interface to connect host boards such as Arduino / STM32
- 4x LED indicators, easy to check module status
- LoRa spread spectrum modulation technology, up to 84 available signal channels, longer communication distance, more resistant to interference
- Suitable for ultra long range communication, automatic multi-level repeat allows multiple networks in the same area
- Low power consumption features such as deep sleep and Wake on Radio for battery powered applications
- Customizable communication key that cannot be decrypted greatly increases the security of user data
- Supports LBT monitoring signal channel sound before transmission, greatly improving the success rate in harsh environments
- Supports RSSI signal intensity to evaluate the signal quality and adjust the network
- Supports wireless parameter configuration by sending wireless command / data packet, remotely configure or receive module parameter
- Supports fixed point transmission, broadcast, signal channel monitor
- Comes with development resources and manual (samples for Raspberry Pi / STM32)
Please Read the Note.
- Raspberry Pi is not included in the product.
What's on the Card?
SX1262 LoRa module
74HC125V: voltage level converter
CP2102: USB to UART converter
Raspberry Pi GPIO connector: for connecting with Raspberry Pi
USB UART port
UART header: for connecting host boards such as STM32 / Arduino
SMA antenna connector
lIPEX antenna connector
Indicators:
- RXD / TXD: UART RX / TX indicator
- AUX: auxiliary display
- PWR: power display
UART selection jumpers
- A: Control the LoRa module via USB TO UART
- B: Control the LoRa module with Raspberry Pi
- A: Access to Raspberry Pi via UART USB
LoRa mode selection jumpers
- short M0, short M1: transmission mode
- short M0, open M1: configuration mode
- Turn on M0, short M1: WOR mode
- Turn on M0, turn on M1: deep sleep mode
Useful Links
- Product informationYou can examine.
- LoRaWAN ModuleYou can review our products.
- Wireless CommunicationYou can review our products.