Servo Motor Driver - 16 Channel - 12 Bit - I2C - Raspberry Pi
12 Bit Servo Motor DriverBy connecting it to Raspberry Pi, you can control up to 16 servo motors and make robot arm or hexapod projects. Although Raspberry Pi development boards are multifunctional and useful, PWM outputs can be weak and insufficient. This shield, which is extremely useful with its extra power input, will power Raspberry Pi in your servo motor projects.
16 Channel 12 Bit Servo Motor Driver Features
- Raspberry Pi connection is compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +
- I2C controlled, can be connected using only 2 pins
- Servo / PWM output up to 16 channels, 12 bit resolution for each channel (4096 scale)
- Integrates 5V regulator, up to 3A output current, powered from battery via VIN terminal
- Standard servo interface, SG90, MG90S, MG996R etc. Supports commonly used servos such as.
- Separated I2C control pins allow operation with other control boards
- Comes with development resources and manual (python samples such as Bluetooth / WiFi remote control)
16 Channel 12 Bit Servo Motor Driver Technical Specifications
- Power supply: 5V (Pi connector) or 6V ~ 12V (VIN terminal)
- Servo voltage: 5V
- Logic voltage: 3.3v
- Driver: PCA9685
- Control interface: I2C
- Size: 65mm x 30mm
- Mounting hole size: 3.0mm
Documents
- Servo Motor Control Card PDFCheck the file.
Useful Links
- Raspberry Pi Sensor and Module TypesYou can examine.
- Motor Driver and Control Card TypesYou can examine.
Raspberry Pi Servo Motor Driver Board - 16 Channel - 12 Bit - WaveShare
- Features
- Payment Options
- Comments (0)
- Images
-
Servo Motor Driver - 16 Channel - 12 Bit - I2C - Raspberry Pi
12 Bit Servo Motor DriverBy connecting it to Raspberry Pi, you can control up to 16 servo motors and make robot arm or hexapod projects. Although Raspberry Pi development boards are multifunctional and useful, PWM outputs can be weak and insufficient. This shield, which is extremely useful with its extra power input, will power Raspberry Pi in your servo motor projects.
16 Channel 12 Bit Servo Motor Driver Features
- Raspberry Pi connection is compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +
- I2C controlled, can be connected using only 2 pins
- Servo / PWM output up to 16 channels, 12 bit resolution for each channel (4096 scale)
- Integrates 5V regulator, up to 3A output current, powered from battery via VIN terminal
- Standard servo interface, SG90, MG90S, MG996R etc. Supports commonly used servos such as.
- Separated I2C control pins allow operation with other control boards
- Comes with development resources and manual (python samples such as Bluetooth / WiFi remote control)
16 Channel 12 Bit Servo Motor Driver Technical Specifications
- Power supply: 5V (Pi connector) or 6V ~ 12V (VIN terminal)
- Servo voltage: 5V
- Logic voltage: 3.3v
- Driver: PCA9685
- Control interface: I2C
- Size: 65mm x 30mm
- Mounting hole size: 3.0mm
Documents
- Servo Motor Control Card PDFCheck the file.
Useful Links
- Raspberry Pi Sensor and Module TypesYou can examine.
- Motor Driver and Control Card TypesYou can examine.