3-Axis Accelerometer / Tilt Sensor - ± 2/4 / 8G 14 Bit - MMA8451 - Adafruit
This high precision and cheap MMA8451 with 14 MHz ADCTriaxial Accelerometer/tilt sensorWe further expanded our selection. DigitalaccelerometerWith it you can detect motion, tilt and basic steering, and the MMA8451 is the perfect accelerometer to get started. It has a wide usage range from + -2g to + 8g with Arduino or another microcontroller.
MMA8451with sharp resultsaccelerometerdir. It is designed to be used in phones, tablets, smart watches and many more, and works in perfect harmony with Arduino projects. The accelerometer also has a tilt / orientation sensing feature. So you can tell if your project is held in horizontal or vertical mode and if it is tilted forward or backward.
This sensor communicates over I2C so you can share it with a group of other sensors on the same two I2C pins. There is an address select pin so you can allow accelerometers to share the I2C bus. Note that this chip requires repeated initialization I2C support if you want to connect it to another processor.
3V'lik bir sensör olduğundan, low-drop bir 3.3V regülatör ve seviye değiştirme devresi ekledik. Bu, 3V veya 5V güç ve mantıkla kullanım için mükemmel bir güvenlik anlamına gelir. Tamamen toplanmış ve test edilmiştir. Breadboard veya perfboard ile kullanmak istiyorsanız, 8-pin 0.1" standart header ile birlikte gelir. Kolay takılması için iki adet 2.5mm (0.1") montaj deliği mevcuttur.
MMA8451 3-Axis Accelerometer / Tilt Sensor Features
- Boyutlar: 21 mm x 18 mm x 2 mm / 0,83" x 0,71" x 0,08"
- Weight: 1.3g
- I2C uses repeated start, address can be selected for 0x1C or 0x1D
Documents
- MMA8451 Accelerometer DatasheetCheck the file.
3-Axis Accelerometer / Tilt Sensor - ± 2/4 / 8G 14 Bit - MMA8451
- Features
- Payment Options
- Comments (0)
- Images
-
3-Axis Accelerometer / Tilt Sensor - ± 2/4 / 8G 14 Bit - MMA8451 - Adafruit
This high precision and cheap MMA8451 with 14 MHz ADCTriaxial Accelerometer/tilt sensorWe further expanded our selection. DigitalaccelerometerWith it you can detect motion, tilt and basic steering, and the MMA8451 is the perfect accelerometer to get started. It has a wide usage range from + -2g to + 8g with Arduino or another microcontroller.
MMA8451with sharp resultsaccelerometerdir. It is designed to be used in phones, tablets, smart watches and many more, and works in perfect harmony with Arduino projects. The accelerometer also has a tilt / orientation sensing feature. So you can tell if your project is held in horizontal or vertical mode and if it is tilted forward or backward.
This sensor communicates over I2C so you can share it with a group of other sensors on the same two I2C pins. There is an address select pin so you can allow accelerometers to share the I2C bus. Note that this chip requires repeated initialization I2C support if you want to connect it to another processor.
3V'lik bir sensör olduğundan, low-drop bir 3.3V regülatör ve seviye değiştirme devresi ekledik. Bu, 3V veya 5V güç ve mantıkla kullanım için mükemmel bir güvenlik anlamına gelir. Tamamen toplanmış ve test edilmiştir. Breadboard veya perfboard ile kullanmak istiyorsanız, 8-pin 0.1" standart header ile birlikte gelir. Kolay takılması için iki adet 2.5mm (0.1") montaj deliği mevcuttur.
MMA8451 3-Axis Accelerometer / Tilt Sensor Features
- Boyutlar: 21 mm x 18 mm x 2 mm / 0,83" x 0,71" x 0,08"
- Weight: 1.3g
- I2C uses repeated start, address can be selected for 0x1C or 0x1D
Documents
- MMA8451 Accelerometer DatasheetCheck the file.
Tags