Gravity: Analog Adjustable Infrared Sensor Switch - Switch (50cm)
Adjustable infrared sensorIt has a high precision photoreflector to realize distance sensing function from 3cm to 50cm. When the infrared light emitted by the emitter reflects on a surface blocking it, the phototransistor can receive the signal for distance calculation. In addition, the adjustment potentiometer has been set for easy and understandable use. Compared with the regular infrared sensor switch, it can be widely used in distance, advantageous visible light, low interference, affordable, easy to install, easy to use and robot obstacle avoidance, assembly lines and many other occasions.
The obstacle detection distance can be adjusted with a potentiometer on the copper screw, after adjustment (eg maximum 60 cm), the sensor will give low straight output within the effective distance to the microcontroller (eg obstructions above 40 cm and 10 cm).
Analogue Adjustable Infrared Sensor Switch (50cm) Technical Specifications
- Power supply: 5V
- 5V supply time Control Outout : 100mA
- Consume circuit:<25mA
- Reaction time:<2ms
- Direction: ≤15 °
- Range: 3 ~ 50cm opacity and adjustable for transparent objects
- Shell marterial: plastic
- Low voltage output will be output when an object is within detection scope
- When connected to MCU pins, you need to add 1 ~ 10K Ohm resistor for pull
- Sharp : 30mm (length) x 20mm (wide) x 13mm (thickness) with 45cm lead wire
Package Included
- Adjustable Infrared Sensor x1
Documents
- ProductYou can review the information.
Useful Links
- Distance and Motion SensorsYou can review our products.
- You askYou can review our products.
Gravity: Analog Adjustable Infrared Sensor Switch (50cm)
- Features
- Payment Options
- Comments (0)
- Images
-
Gravity: Analog Adjustable Infrared Sensor Switch - Switch (50cm)
Adjustable infrared sensorIt has a high precision photoreflector to realize distance sensing function from 3cm to 50cm. When the infrared light emitted by the emitter reflects on a surface blocking it, the phototransistor can receive the signal for distance calculation. In addition, the adjustment potentiometer has been set for easy and understandable use. Compared with the regular infrared sensor switch, it can be widely used in distance, advantageous visible light, low interference, affordable, easy to install, easy to use and robot obstacle avoidance, assembly lines and many other occasions.
The obstacle detection distance can be adjusted with a potentiometer on the copper screw, after adjustment (eg maximum 60 cm), the sensor will give low straight output within the effective distance to the microcontroller (eg obstructions above 40 cm and 10 cm).
Analogue Adjustable Infrared Sensor Switch (50cm) Technical Specifications
- Power supply: 5V
- 5V supply time Control Outout : 100mA
- Consume circuit:<25mA
- Reaction time:<2ms
- Direction: ≤15 °
- Range: 3 ~ 50cm opacity and adjustable for transparent objects
- Shell marterial: plastic
- Low voltage output will be output when an object is within detection scope
- When connected to MCU pins, you need to add 1 ~ 10K Ohm resistor for pull
- Sharp : 30mm (length) x 20mm (wide) x 13mm (thickness) with 45cm lead wire
Package Included
- Adjustable Infrared Sensor x1
Documents
- ProductYou can review the information.
Useful Links
- Distance and Motion SensorsYou can review our products.
- You askYou can review our products.