URM37 Ultrasonic Distance Sensor - Arduino - Raspberry Pi - LattePanda Compatible - DFRobot
URM37Arduino Ultrasonic Distance Sensor, betterdistance measurementComes with temperature compensation ensuring accuracy. In this way, errors caused by ambient temperature when measuring distance are maximized. URM37Arduino Ultrasonic Distance SensorOffers analog output, switch, serial (TTL and RS232 level optional) and PWM output modes. In analog mode, the sensor produces outputs the voltage that is proportional to the distance. It can be connected to Arduino, Raspberry Pi and LattePanda (Windows 10 development board).
With switch mode, the ultrasonic sensor can send an on / off signal when an object is detected at a certain distance specified by the user. In serial mode, the actual distance value (cm) is calculated and output via TTL / RS232. With PWM mode, the sensor generates a PWM signal over time.
URM37 Arduino Ultrasonic Distance Sensor - Ultrasonic Sensor Features
- It allows the user to adjust the output level at RS232 or TTL level with the buttons on the sensor.
- Dead zone is reduced and accuracy is increased with modified algorithm.
- Wide voltage support + 3.3V-5.0V
- Has power reverse protection
- Measures in automatic time interval, if desired, this time interval can be changed
- It is compatible with most servos on the market, allowing you to control any 180 degree servo.
- The refresh rate is now set to 10hz.
- Power: + 3.3V ~ + 5.0V
- Current:<20mA
- Working temperature: -10 ~ +70 C
- Sensing Distance: 5cm-500cm
- Resolution: 1cm
- Interface: RS232 (TTL), PWM, Switch, Analog
- Size: 22mm × 51mm
- Weight: 25g
Documents
- URM37 Arduino Ultrasonic Distance Sensor DatasheetCheck the file.
Useful Links
- Latte Panda Accessory TypesYou can examine.
URM37 Ultrasonic Distance Sensor - Arduino - Raspberry Pi - LattePanda Compatible
- Features
- Payment Options
- Comments (0)
- Images
-
URM37 Ultrasonic Distance Sensor - Arduino - Raspberry Pi - LattePanda Compatible - DFRobot
URM37Arduino Ultrasonic Distance Sensor, betterdistance measurementComes with temperature compensation ensuring accuracy. In this way, errors caused by ambient temperature when measuring distance are maximized. URM37Arduino Ultrasonic Distance SensorOffers analog output, switch, serial (TTL and RS232 level optional) and PWM output modes. In analog mode, the sensor produces outputs the voltage that is proportional to the distance. It can be connected to Arduino, Raspberry Pi and LattePanda (Windows 10 development board).
With switch mode, the ultrasonic sensor can send an on / off signal when an object is detected at a certain distance specified by the user. In serial mode, the actual distance value (cm) is calculated and output via TTL / RS232. With PWM mode, the sensor generates a PWM signal over time.
URM37 Arduino Ultrasonic Distance Sensor - Ultrasonic Sensor Features
- It allows the user to adjust the output level at RS232 or TTL level with the buttons on the sensor.
- Dead zone is reduced and accuracy is increased with modified algorithm.
- Wide voltage support + 3.3V-5.0V
- Has power reverse protection
- Measures in automatic time interval, if desired, this time interval can be changed
- It is compatible with most servos on the market, allowing you to control any 180 degree servo.
- The refresh rate is now set to 10hz.
- Power: + 3.3V ~ + 5.0V
- Current:<20mA
- Working temperature: -10 ~ +70 C
- Sensing Distance: 5cm-500cm
- Resolution: 1cm
- Interface: RS232 (TTL), PWM, Switch, Analog
- Size: 22mm × 51mm
- Weight: 25g
Documents
- URM37 Arduino Ultrasonic Distance Sensor DatasheetCheck the file.
Useful Links
- Latte Panda Accessory TypesYou can examine.